How to Get Rid of a Sulfur-Rotten Smell in the Water

What would you do if you came home from a bad day at work? To unwind and forget about the day’s worries, you fill the tub with scalding hot water. The hot water begins to fill up, and you detect an awful rotten egg stench coming from it. You see reddish-brown, orange, and black rust particles floating in the bathwater seconds later. What is going on here? What should you do?

Don’t be alarmed. Many homeowners have problems with rotten egg stench in their water and rust stains. Fortunately, they are quite simple to remedy. We’ll go over the major reasons behind these issues and what you can do to prevent them from returning to your house.

How to Get Rid of a Rotten Egg Smell or Sulfur Water

There are a variety of techniques for eliminating sulphur from water. Each treatment approach’s effectiveness is dependent on many elements, including the amount of iron and manganese in the water and whether or not bacterial contamination must also be eliminated. Before proceeding with any of these treatment strategies, you should think about how easy the procedure is as well as how much it will cost overall, including installation, maintenance, and chemical expenditures.

1.  Iron Removal Filter Method

The most efficient method to remove and avoid sulphur in your water is with an iron filter. An iron filter can also eliminate hydrogen sulphide as well as iron and manganese. This filtering device oxidizes the hydrogen sulphide before it is converted into insoluble sulphur, which is then removed by the filtering procedure.

2. Use hydrogen peroxide

Shutting off the cold-water inlet valve, draining some of the water from the water heater, and disconnecting the metal hose that connects to the cold-water section of the heater may help eliminate anaerobic bacteria during a 3% hydrogen peroxide flush. To do so, turn off your water heater’s cold-water intake valve, drain some of the water from the heater, and then cut off the metal pipe that joins it.

Pour one cup of 3% hydrogen peroxide for every 10 gallons of water heater capacity (available in most pharmacies) into a large container. For example, a 40-gallon tank will require four cups of hydrogen peroxide or a full 32-oz bottle.

Last, reconnect the hose, then turn the cold-water valve back on to fill up the tank and let it sit for a few hours. The peroxide will eliminate the bacteria and odour they generate. Chlorine bleach is also an option, but peroxide is considerably safer and more environmentally friendly.

3. Use a water filter that is appropriate for your whole house.

The presence of a sulphur odour in only a few sinks at home might indicate that the problem is coming from the drains, fixtures, or pipes – rather than the water. In this situation, simple disinfection or flushing may be sufficient to eliminate the scents. If you can detect an aroma at every faucet, on the other hand, it’s probable that the source is water itself. A whole house well water filtering system with a UV filter would be ideal in this case. Regardless of the source, a whole house well water filter that removes hydrogen sulphide and germs is preferable. These systems can reduce unpleasant smells while also protecting you and your family from additional chemicals and microbial pathogens.